من بين التوضيحات المذكورة في help موضوع السريلة
Mini TL866 Universal Programmer -> Set Auto Serials
<Set Auto Serials>: A IC serial number is automatically added to a certain buffer when programming. It is convenient to the chip programming settings, time settings or unique serial number settings at factory. The programmer has many kinds of numbering algorithms that can meet the needs of users.
Click <main menu>--- <Device> --- <Serials Number> to pop up the following dialog box:
Firstly select the Auto Inc. mode. There are four algorithm modes to choose from the dialog box and the detailed instructions are as below:
1. The default increment algorithm <Default INC.>
This algorithm interface is shown above, a set length of number is placed in the start address and the number will be increased according to the <Inc. Step>. After setting the parameters, click <Test> to start testing and check the change regularity of different set parameters. <original Value> and <Inc. Step> can be set in the above dialog box.
You can set <record> file after the parameters are set and the testing result is correct. If blank, the record file is invalid and the data cannot be recorded into the file when programming; If the <record>file is set, the set serial number will be added at the end of the record file after programming.
Finally, tick off <Enable Auto. SN> and click <Save> button.
2. time algorithm <Time Mode>
Time algorithm dialog interface is as shown below:
There are four time encoding format as below:
(1) date + time Total Length: 16 bytes
The date and time will be added in the specified place, total length is 16bytes.
(2) The date +5 bytes increment Total Length: 16 bytes
The incremental parts can be set original value and step.
(3) Date + time + 8 bytes increment Total Length: 24 bytes
The incremental parts can be set original value and step.
(4) Date + time + 16 bytes random number Total Length: 32 bytes
The16 bytes are random and it can generate a unique product serial number. In this way, the <Record> file must be set so that the generated code can be recorded in the file. Otherwise, your don't know what is the product serial number.
The following operating steps are the same as the above <Default INC.>
3. the random sequence number algorithm <Random>
The algorithm generates a specified length of random number, as shown below:
4. user-defined algorithm <user define>
This user-defined algorithm has great flexibility. You can set any ways of numbering algorithms, for the detailed usage, see the directory: MiniPro\Serialnumber\SOURCE_DLL. The interface is as below:
For AVR Microcontroller, encryption of RC verified byte can be fully achieved by invoking the DLL dynamic link library. Here are all source program and testing ways, see the directory: MiniPro\ATMEGA8_LED
After making DLL file, you copy them to the application directory : MiniPro\Serialnumber, that's OK. You can select your algorithm file in the <user algorithm> list.
The following operating steps are the same as other algorithms.
------------ Important note: ----------------------------------- -
1. After setting the above, the programmer will not automatically add the serial number you set to the chip when programming, unless you tick off <Auto Serials No.> in the main interface Options.
2.Please firstly set algorithm and tick off<Enable Auto SN>(setting path: <main menu>-<Device>-<serials number> )and then the <Auto Serials No.> option can be ticked off.
3. After <Auto Serials No.> option is ticked off, if you reset the numbering algorithm, in main interface <Auto Serials No.> option must be ticked off again.
4. You must reset the numbering algorithm if the chip model is changed.
5. In the project mode, the algorithm can be saved in the project file. You can directly open the project file, and automatically invoke the automatic numbering algorithm. Therefore, it is easier and more convenient to use for the mass production in the project mode
الرجاء من اهل الخبرة تبسيط الامور ليتسنى للجميع الفهم
شكرا