ABOZIAD@AHMAD
2013/06/19, 12:18 PM
نسخه ستار من المبدع دائما rawdvb الخاصة للأصدار
http://starshare.org/imgup/images/947Dvbdream_2.4.png
الجديد في الاصدار الرسمي:
v2.4 (16.06.2013)
- Support for new modulation technologies, MIS with VCM/ACM , PLP and PLS
- E-AC3 support (This fixes no audio problem for some channels, tested with DVB-T France streams)
- An important HD record problem fixed
- New preferences option "Prevent Monitor Power Off (Override ******s power options)
- Added experimental support for MadVR (a 3rd party video renderer claiming higher video quality)
- Now possible to stream all channels / whole TS of a tranponder onto local network
- Streaming was not working on some channels (when PCR is different than Video) fixed!
- One-channel streaming provides all audio pids now
- Running application again now brings it to front instead of displaying a warning
- Option to collect EPG for other satellites too. (in Options->Preferences->EPG (TV Guide) Only recommended for North American users
- Fixed the problem with EPG Cache optimization setting "Within X hours", now default EPG filter option will cache/display EPG events that are "within 5 hours", You can change this behaviour in Options->Preferences->EPG (TV Guide).
- Option to start VLC from current record in renderless (in Tools menu, waits for 15 secs to have enough data. This option is meant to be used an alternative to timeshift, make sure you increased max file size in record options)
* Channel list file format changed. DD takes a backup of old CHL and upgrades it to new format itself. New format won't be backward compatible
* E-AC3 has been tested using LAV and MPC audio decoder. MPC Standalone Filters.
* You can stream all channels from the same frequency. Just set UDP TS Client IP address to the client PC's address, then check "Active" and "Send all channels". DD might need a restart after this. Now you can start VLC on client PC and VLC's Main menu->Media->Open Network Stream, type this as URL "udp://@:1234", click on "Play". You can switch between channels using Main Menu->Playback->Program. DD will stream channels as decoded as a whole TS. Make sure you disable streaming when you don't use, otherwise it can cause problems while watching TV.
بعد تثبيت النسخة تحتاج لتغيير ال Device واختيار ال Device المتوافق مع كرتك.
http://starshare.org/imgup/images/438Sans_titre.png
مستخدموا وندوز 7 يستحسن تغيير العارض (Renderer) من VMR9 الى EVR لصورة أفضل.
ملاحظة هامة : اذا اخترت تثبيت البرنامج في مكان مختلف عن المكان الافتراضي واخترت في نفس الوقت تثبيت الاعدادات المقترحة (Install Optimized Settings) يجب تغيير مكان حفظ الملفات المسجلة قبل تسجيل أي مادة بالبرنامج ويتم ذلك من خلال اعدادات البرنامج.
http://starshare.org/imgup/images/355Sans_titre.png
رابط التحميل من رفعى الخاص
اضغط هناااااااااااااااااااااااااااااا (http://www.gulfup.com/?MzLFif)
تحياتي للجميع.
http://starshare.org/imgup/images/947Dvbdream_2.4.png
الجديد في الاصدار الرسمي:
v2.4 (16.06.2013)
- Support for new modulation technologies, MIS with VCM/ACM , PLP and PLS
- E-AC3 support (This fixes no audio problem for some channels, tested with DVB-T France streams)
- An important HD record problem fixed
- New preferences option "Prevent Monitor Power Off (Override ******s power options)
- Added experimental support for MadVR (a 3rd party video renderer claiming higher video quality)
- Now possible to stream all channels / whole TS of a tranponder onto local network
- Streaming was not working on some channels (when PCR is different than Video) fixed!
- One-channel streaming provides all audio pids now
- Running application again now brings it to front instead of displaying a warning
- Option to collect EPG for other satellites too. (in Options->Preferences->EPG (TV Guide) Only recommended for North American users
- Fixed the problem with EPG Cache optimization setting "Within X hours", now default EPG filter option will cache/display EPG events that are "within 5 hours", You can change this behaviour in Options->Preferences->EPG (TV Guide).
- Option to start VLC from current record in renderless (in Tools menu, waits for 15 secs to have enough data. This option is meant to be used an alternative to timeshift, make sure you increased max file size in record options)
* Channel list file format changed. DD takes a backup of old CHL and upgrades it to new format itself. New format won't be backward compatible
* E-AC3 has been tested using LAV and MPC audio decoder. MPC Standalone Filters.
* You can stream all channels from the same frequency. Just set UDP TS Client IP address to the client PC's address, then check "Active" and "Send all channels". DD might need a restart after this. Now you can start VLC on client PC and VLC's Main menu->Media->Open Network Stream, type this as URL "udp://@:1234", click on "Play". You can switch between channels using Main Menu->Playback->Program. DD will stream channels as decoded as a whole TS. Make sure you disable streaming when you don't use, otherwise it can cause problems while watching TV.
بعد تثبيت النسخة تحتاج لتغيير ال Device واختيار ال Device المتوافق مع كرتك.
http://starshare.org/imgup/images/438Sans_titre.png
مستخدموا وندوز 7 يستحسن تغيير العارض (Renderer) من VMR9 الى EVR لصورة أفضل.
ملاحظة هامة : اذا اخترت تثبيت البرنامج في مكان مختلف عن المكان الافتراضي واخترت في نفس الوقت تثبيت الاعدادات المقترحة (Install Optimized Settings) يجب تغيير مكان حفظ الملفات المسجلة قبل تسجيل أي مادة بالبرنامج ويتم ذلك من خلال اعدادات البرنامج.
http://starshare.org/imgup/images/355Sans_titre.png
رابط التحميل من رفعى الخاص
اضغط هناااااااااااااااااااااااااااااا (http://www.gulfup.com/?MzLFif)
تحياتي للجميع.