رد: ما الريسيفرات التى تدعم فيدات 4.4.2
اقتباس:
المشاركة الأصلية كتبت بواسطة midomorad222
ما هى الريسيفرات التى تشغل فيدات كروت السات
|
يوجد اخي ولكنه سعرو غالي
يوجد هذا الجهاز لفتح الفيدات 4:2:2
بدون اي برامج
جهاز عملاق بعني الكلمة بيفتح جميع صيغ الصوت والصورة
ودي صورة اخري للجهاز وجزءمن امكانياته الرهيبة
Frequency range: 48~862MHz
Symbol rate: 1~7MBaud
Constellation: 16, 32, 64, 128, 256QAM
Bandwidth: 6MHz/7MHz/8MHz
RF input level: 45~75dBuV
Reflection loss: 7dB
Connector: 1*F-type input and 1*F-type loop out, 75ohm
DVB-S/S2 Input
Frequency range: 950~2150MHz
Symbol rate: 2~45MBaud
Roll off: DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.2, 0.3, 0.35
FEC: DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
RF input level:-25~-65dBm
LNB power: 13VDC, 18VDC or off, 22KHz or off
DiSEqC: DiSEqC1.0
Connector: 1*F-type input and1*F-type loop out, 75ohm impendence DVB-T/T2 Input
Frequency range: 104~862MHz(VHF/UHF)
Bandwidth: 6MHz/7MHz/8MHz
FFT: DVB-T: 2K, 8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guard intervals: DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128
FEC: DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Constellation: DVB-T: QPSK, 16QAM, 64QAM
DVB-T2: QPSK, 16QAM, 64QAM, 256QAM
RF input level: -70 ~ -20dBm
Reflection Loss: 7dB
Connector: 1*F-type input and1*F-type loop out, 75ohm impendence
DTMB Input
Frequency range: 46.5 ~ 866MHz
Symbol rate: 7.56MHz
Constellation: 4QAM-NR, 4QAM, 16QAM, 32QAM, 64QAM
Guard intervals: PN420, PN595, PN945
Bandwidth: 6MHz, 7MHz, 8MHz
Roll off: 0.05
Signal interleave: 240, 720
FEC: 0.4, 0.6, 0.8
RF input level: -87 ~ -29dBm
Connector: 1*F-type input and1*F-type loop out, 75ohm impendence
ATSC Input
Frequency range: 54 ~ 864MHz
Symbol rate: 10.762MHz
Constellation: 8VSB
Bandwidth: 6MHz
Roll off: 0.115
RF input level: -75 ~ 7dBm
Connector: 1*F-type input and1*F-type loop out, 75ohm impendence
ASI Input
Compliant with DVB-ASI EN50083.9standard
Packet Length: Auto-detect 188/204 byte packets
TS bit-rate: up to 200Mbps
Connector: 2*BNC, 75ohm impendence
DS3/E3 Input (optional)
Standard: compatible with ITU-T G.703
Frame: compatible with ITU-T G.752 and ITU-T G.804
Bit-rate: DS3:44.736Mb/S, E3:34.368Mb/S
Connector: 1*F-type input and1*F-type loop out, 75ohm impendence TS over IP Input/Output
Protocol: UDP/RTP, Unicast or Multicast optional, supports IGMP v2,ARP
Bit-rate: up to 800Mbps
Connector: RJ45*2, GigE(1000M) interface.
TS Processing
TS input management: de-multiplexing and re-multiplexing
TS output: 2 groups of independent ASI outputs
Service and PID management: programs, PID filtering and re-mapping
PSI/SI processing: PSI/SI creation and edition
LCN edition and insertion
De-scrambler: DVB common decrypt algorithm
Common Interface: dual PCMCIA (2 slots)
BISS mode: BISS 1 and BISS E
Transport Stream Output Interfaces
ASI Output
Connector: ASI out, BNC interface.
Output: 2+2 Channels independent ASI outputs
TS format: DVB-ASI, compliant with EN50083-9
TS bit-rate: up to 200Mb/S
Video Decoding
Video decoding: MPEG-2([email protected] for SD,[email protected] for HD)
MP: 4:2:0 8-bit
HP: 4:2:2 10-bit
MPEG-4/H.264 AVC ([email protected] for SD, [email protected] for HD)
High-422(Hi442P) 4:2:2 8/10-bit
High-10(Hi10P) 4:2:0 10-bit
High (HP) 4:2:0 8-bit
Main (MP) 4:2:0 8-bit
Constrained Baseline (CBP) 4:2:0 8-bit
High 10 Intra Profile (AVC-I 50) 4:2:0 10-bit
High 4:2:2 Intra Profile (AVC-I 100) 4:2:2 8/10-bit
Audio Decoding
Audio decoding: MPEG-1 Layer II (2 pairs of stereo)
AC3 (5.1 down-mix to 2.0, AC3 pass-through)
AC3+(5.1 down-mix to 2.0, AC3+ pass-through)
Dolby-E(5.1 down-mix to 2.0, Dolby-E pass-through)
MPEG-2 AAC(5.1 down-mixing to 2.0)
MPEG-4 HE-AAC V1/V2(5.1 down-mixing to 2.0)
Video and Audio Outputs
HDMI output
Connector: HDMI V1.3, Max. Resolution 1080i
Video resolution: 1080i*30, 1080i*29.97, 1080i*25
720P*60, 720P*59.94, 720P*50, 720P*29.97, 720P*25
480P*60, 576P*50, 576i*25, 480i*29.97
Audio embedded in HDMI: 1 Channel stereo
SDI output
Connector: 1+1*BNC interface, 75ohm (SDI interface enables programmed to ASI out)
Video resolution: 1080P*59.94, 1080P*50, 1080i*30, 1080I*29.97, 1080i*25, 720P*60, 720P*59.94, 720P*50, 720P*29.97, 720P*25, 576i*25, 480i*29.97
Bit-rate: <=60Mb/S
Standard Definition: SMPTE 259M 270Mb/S(10bit)
High Definition: SMPTE 259M 1.485Gb/S(10bit)
Audio Embedded in SDI: 8*PID of audio embedded or pass-through
Level: 800mVp-p
Genlock
Connector: 1*BNC interface, 75 ohm independence
Input signal: BB/Tri-sync
Digital audio processing
Connector: 2*DB9 type, (2 groups of independent "XLR+AES/EBU") 6*AES/EBU, BNC interface
Audio output: up to 8*PID of audio decoding or pass-through
Nominal Output Level: 1Vp-p
Output format: SDI(audio embedded in SDI), AES/EBU
Output impedance: AES1-AES2: AES/EBU(Canon type) 110ohm impedance
AES3-AES8: AES/EBU(BNC interface), 75ohm impedance
Composite video output
CVBS connector: 1*BNC interface, 75ohm impedance.
CVBS standard: NTSC,PAL and SECAM
CVBS resolution: 576i*25, 480i*29.97
Nominal Output Level: 1.0Vp-p
Frequency Response: <+|- 1 dB, at 5.5 MHz for PAL/SECAM, 4.2MHz for NTSC
Chroma-Luma Delay: <+|- 30ns
Field Time Distortion: <2%
Line Time Distortion: <1%
Short Time Distortion: <2%
Differential Gain: <3%
Differential Phase: <2degree
Signal to Noise Ratio: >55dB (luminance weighted)
Analog audio output
Connector: 2*DB9 type (2*XLR)
2*RCA interface (2*L/R)
Output Impedance: 600 ohm
Output mode: Left, Right, Dual Mono, Stereo
Output: 2 pairs of stereo audio outputs (2 Audio PIDs or 4 channels decoded).
Cross Talk Among Channels: >70dB
Total harmonic distortion: <0.3%[email protected]
Frequency Response: +|- 0.5dB(20Hz ~ 18KHz)
Level: 0dBm in 600ohm (0dBu), adjustable range +|- I0dB Ancillary Data Processing
Subtitle: DVB,EBU
VBI: Teletext WSS
Closed Caption: EIA 608, EIA708, EIA608-to-708 GENERAL OPTIONS
Redundancy
Redundancy connector: between Tuner, ASI and TS/IP input
Switching Condition: TS Sync Loss
Switching Mode: Main, Spare
Alarm
Connector: DB9 type
Switching Condition: configured by user
Control and Monitoring
Connector: 1*RJ-45,10/100 Base-T for NMS
Remote control: SNMP 2.0 , HTTP ( Web GUI ) , Proprietary HDMS
Local control: management via Front panel and LCD
Serial Port: 1*RS-232 D-sub female, for debug use only
Video monitoring: 1.5" TFT LCD monitor
Equipment Upgrade: Embedded FTP loader, Telnet and USB
Physical and Power
Voltage: 90~260VAC, 50/60Hz
Consumption: 25W
Operating temperature: 0~50Centigrade
Dimensions: 430(W)mm*400(L)mm*45mm(H)
Weight: 4Kg DMB-9030
DMB-9030
only 4:2:0 8-bit decoding MP/HP 4:2:0/4:2:2 8-bit/10-bit decoding
|